GlassBedding

Here are the pictures from my glass bedding job. I used Brownells Acraglass Gel. This is kind of hard to use for the pillar, the original Acraglass that runs might have been better. However, the gel seemed to be a good choice for the action; I'll have to try both before deciding which is best. The white stuff is molding clay that is left over. I basically followed Steve Wagner's bedding information. I bedded this stock mainly to save it from cracking. The receiver recoil lug didn't contact the cross bolt very well and it was doomed to crack.

Rear pillar	Receiver bedded to cross bolt and receiver ring bedded into stock.